Incinérateur au diesel 150 kg / h
INCINÉRATEUR, DIESEL. CAPACITÉ: Brûleur 150 kg / h. Quantité: Deux [2] avec accessoires complets. Types de déchets utilisés: DÉCHETS GÉNÉRAUX
Continue readingTag: diesel
Incinérateur de déchets d'huile
Informations de base. Marchés d’exportation: mondiaux Description du produit Principales caractéristiques: * Tous les modèles avec double chambre de combustion.
Continue readingmedizinische Verbrennungsanlagen
● Kann 25-30 kg pro Stunde verbrennen ● Bestehen aus zwei Kammern, um eine signifikante Reduzierung der Emissionen zu gewährleisten
Continue readingequipo de incineración de mascotas
Capacidad mínima: 500L Provisto de estructura de soporte valvulas Tanque indicador de nivel embudo Filtra las impurezas en la boca
Continue readingHersteller von Müllverbrennungsanlagen aus China
Verbrennung: medizinischer Abfall und allgemeiner Abfall Kapazität zur Verbrennung von Abfall: 400-500 kg / h Kraftstoff: Diesel Kraftstoffverbrauch: maximal 10
Continue readingHersteller von chinesischen Verbrennungsanlagen
In einem einfachen Design mit einer Metallstahltrommel elektrisch. einschließlich: Ein Käfig für die Aufnahme von biomedizinischen Abfällen; Eine Brennkammer mit
Continue readingmobile Verbrennungsanlage
Benzin: Diesel Verbrauch: 8-10 Liter / Stunde Kapazität: zur Einäscherung (Aas und Beute) 350-400 kg / Stunde Temperatur: 900-1350 °
Continue readingIncinerador diesel alimentado 150kg / hr
INCINERADOR, DIESEL. CAPACIDADE: Queimador 150 kg / hr. Quantidade: Dois [2] com acessórios completos. Tipos de resíduos usados: RESÍDUOS GERAIS
Continue readingquemadores incineradores
Control secuencial completamente automático proporcionado por internos Sistema PLC que proporciona control de: Precalentamiento de la cámara secundaria Ciclo de
Continue readingSmaller cremators incinerators
Smaller cremators that will run diesel and will be capable of doing all the other dogs/cats/pets that we have. We only cremate pets individually so this is what we require. Have your company as member of Markis Hospital waste management group as planer or supplier, contractor of solutions or operating partners of the solution of hospital waste management in the projects we are developing, starting with Larissa and Volos. Members of Markis waste management group will also have the possibility to provide training and technical services to the health sector of Greece and other countries via the TSC which we plan to make the same time in Larissa (enclosed diagram indicates the role of each party joining Markis waste management group). ● Able to burn 25-30kg per hour ● Consist of two chambers to ensure significant reduction in emission ● Be capable of temperature in range of 800c to 1000c ● Low maintenance design ● Must be Diesel fuelled ● Need more than 15amp 220- 250V power ● kW Consumption power consumption to be stated ● Onboard or in-built fuel storage storage tank & should use no more than 12L of dies el per hour to burn 25-30kg of waste ● Solid waste reduction in range of 90-97% ( should be routinely achieved) 1. – 2 medical waste autoclaves 350ltr and 100ltr 2. – 1 medical waste shredder 3. – 3 medical macerators 4. – 27 Waste transfer trolleys.
Continue readingControlled air medical waste incinerator designed for incineration of bio-medical waste
Controlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.) Operational Specs Physical Specs Combustion Chamber Volume (m3) 8.80m3 Burn Rate* up to 1,500kg per hour Average Fuel Consumption 65 kg per hour or more (7 diesel burners) Operational Temperature 850 – 1320°C Gas Retention in Secondary Chamber Large secondary chamber Temperature Monitoring Yes Average ash residue (%)
Continue readingControlled air medical waste incinerator designed for incineration of bio-medical waste
Controlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.) Operational Specs Physical Specs Combustion Chamber Volume (m3) 8.80m3 Burn Rate* up to 1,500kg per hour Average Fuel Consumption 65 kg per hour or more (7 diesel burners) Operational Temperature 850 – 1320°C Gas Retention in Secondary Chamber Large secondary chamber Temperature Monitoring Yes Average ash residue (%)
Continue readingSupply, Installation and Commissioning of DIESEL FIRED INCINERATORS
Supply, Installation and Commissioning of DIESEL FIRED INCINERATORS Medical Waste Incinerator, 100 to 120 Kg/hr Application For incineration, general and pathological Capacity 100 C 120 kg/h burn rate Type Two combustion chambers type; primary and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit Operating time Minimum 8 hours daily Operating temperature From 850 0C to 1200 0C, Automatic controlled Residual Ash 5 to 10% Construction Constructed from heavy duty mild or aluminized steel Or equal and approved equivalent Insulation material Refractory material lining similar or equal to calcium Silicate and hot face combination of heavy duty brickwork
Continue readingSupply, Installation and Commissioning of DIESEL FIRED INCINERATORS
Supply, Installation and Commissioning of DIESEL FIRED INCINERATORS Medical Waste Incinerator, 100 to 120 Kg/hr Application For incineration, general and pathological Capacity 100 C 120 kg/h burn rate Type Two combustion chambers type; primary and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit Operating time Minimum 8 hours daily Operating temperature From 850 0C to 1200 0C, Automatic controlled Residual Ash 5 to 10% Construction Constructed from heavy duty mild or aluminized steel Or equal and approved equivalent Insulation material Refractory material lining similar or equal to calcium Silicate and hot face combination of heavy duty brickwork
Continue readingIncinerador de desechos médicos de aire controlado diseñado para la incineración de desechos biomédicos
Incinerador de desechos médicos de aire controlado diseñado para la incineración de desechos biomédicos generados en un centro de procesamiento
Continue readingControlled air medical waste incinerator designed for incineration of bio-medical waste
Controlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.) Operational Specs Physical Specs Combustion Chamber Volume (m3) 8.80m3 Burn Rate* up to 1,500kg per hour Average Fuel Consumption 65 kg per hour or more (7 diesel burners) Operational Temperature 850 – 1320°C Gas Retention in Secondary Chamber Large secondary chamber Temperature Monitoring Yes Average ash residue (%)
Continue readingmit Dieselöl befeuerte Verbrennungsanlage für medizinische Abfälle
Hochtemperatur-Abfallverbrennungsanlage Modell D. MB 750XL Verbrennungsrate-150 kg / Stunde Mindestgewicht (kg) -4000 kg Sekundärkammer (Doppelkammer mit Nachverbrennung) Gasretentionszeit 2 Sekunden
Continue readingFourniture, installation et mise en service des INCINÉRATEURS DIESEL
Fourniture, installation et mise en service des INCINÉRATEURS DIESEL Incinérateur de déchets médicaux, 100 à 120 kg / h Application
Continue readingpet incinerator deisel
pet incinerator deisel is small-middle size incinerator for pet cremation and the fuel type is diesel oil. we sale the
Continue readingControlled air medical waste incinerator designed for incineration of bio-medical waste
Controlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.) Operational Specs Physical Specs Combustion Chamber Volume (m3) 8.80m3 Burn Rate* up to 1,500kg per hour Average Fuel Consumption 65 kg per hour or more (7 diesel burners) Operational Temperature 850 – 1320°C Gas Retention in Secondary Chamber Large secondary chamber Temperature Monitoring Yes Average ash residue (%)
Continue reading