HICLOVER Solution for Fighting COVID-19, with ISO9001/CE Certification
Базовая информация. Номер модели: поставщик мусоросжигательного завода в Китае Экспортные рынки: глобальный описание продукта Ответ по технологиям (FAQ) В: Какие
Continue readingПервичная камера: Сверхпрочный корпус из мягкой стали, высококачественная огнеупорная футеровка и изоляция 01 x газовые горелки (автоматические) 01 x точек
Continue readingCapacity of destruction in weight: 60 Kg/h. It should be able to operate not less than 10 hours/day This incinerator
Continue readingIncinérateur de déchets médicaux, 50 à 60 kg / h Support Projet d’appui au secteur de la santé Point d’installation
Continue readingمعلومات أساسية. نموذج رقم: تصميم محرقة المستشفى مصادر السحب: معالجة النفايات الصلبة طرق المعالجة: الاحتراق أسواق التصدير: عالمية وصف المنتج
Continue readingCapacity of destruction in weight: 60 Kg/h. It should be able to operate not less than 10 hours/day This incinerator
Continue reading Cadenas de elevación: debe ser una cadena de elevación doble de estilo de rodillo y debe cumplir con un
Continue readingResearchers at the University of York have concluded that PyroPure (UK) technology has the capacity to alter the way in
Continue readingControlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.) Operational Specs Physical Specs Combustion Chamber Volume (m3) 8.80m3 Burn Rate* up to 1,500kg per hour Average Fuel Consumption 65 kg per hour or more (7 diesel burners) Operational Temperature 850 – 1320°C Gas Retention in Secondary Chamber Large secondary chamber Temperature Monitoring Yes Average ash residue (%)
Continue readingModelo CA50 Capacidade de alimentação Média de 60 kg por alimentação Taxa de queima Média de 70 kg por hora
Continue readingControlled air medical waste incinerator designed for incineration of bio-medical waste generated at a blood-processing center. The waste to be treated mainly includes bio-waste (i.e. bodily fluids), infectious and hazardous waste such as syringes, needles, and other medical waste (i.e. silicon rubbers, plastic, textiles, papers, packs, etc.) Operational Specs Physical Specs Combustion Chamber Volume (m3) 8.80m3 Burn Rate* up to 1,500kg per hour Average Fuel Consumption 65 kg per hour or more (7 diesel burners) Operational Temperature 850 – 1320°C Gas Retention in Secondary Chamber Large secondary chamber Temperature Monitoring Yes Average ash residue (%)
Continue readingوصف المنتج 1. تحفظ شركة Clover Medical Limited جميع الحقوق الخاصة بإصلاح / تحديث معلومات المنتج على موقع الويب. المواصفات
Continue readingTamaño: 940 x860x2700 milímetro Material: PILA DE ACERO INOXIDABLE, REVESTIMIENTO DE HORMIGÓN REFRACTARIO MATERIAL DE AISLAMIENTO ESPECIAL Con quemador: 15
Continue readingSupply, Installation and Commissioning of DIESEL FIRED INCINERATORS Medical Waste Incinerator, 100 to 120 Kg/hr Application For incineration, general and pathological Capacity 100 C 120 kg/h burn rate Type Two combustion chambers type; primary and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit Operating time Minimum 8 hours daily Operating temperature From 850 0C to 1200 0C, Automatic controlled Residual Ash 5 to 10% Construction Constructed from heavy duty mild or aluminized steel Or equal and approved equivalent Insulation material Refractory material lining similar or equal to calcium Silicate and hot face combination of heavy duty brickwork
Continue readingSupply, Installation and Commissioning of DIESEL FIRED INCINERATORS Medical Waste Incinerator, 100 to 120 Kg/hr Application For incineration, general and pathological Capacity 100 C 120 kg/h burn rate Type Two combustion chambers type; primary and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit Operating time Minimum 8 hours daily Operating temperature From 850 0C to 1200 0C, Automatic controlled Residual Ash 5 to 10% Construction Constructed from heavy duty mild or aluminized steel Or equal and approved equivalent Insulation material Refractory material lining similar or equal to calcium Silicate and hot face combination of heavy duty brickwork
Continue readingTiempo de esterilización: aprox. 30 minutos a 121 ° C / 1,1 bar o aproximadamente 15 minutos a 132 °
Continue reading